array_pad
(PHP 4, PHP 5, PHP 7, PHP 8)
array_pad — 以指定长度将一个值填充进数组
说明
array_pad() 返回
array 的一个拷贝，并用
value 将其填补到
length 指定的长度。如果
length 为正，则填补到数组的右侧，如果为负则从左侧开始填补。如果
length 的绝对值小于或等于
array 数组的长度则没有任何填补。有可能一次最多填补
1048576 个单元。
参数
-
array -
需要被填充的原始数组。
-
length -
新数组的长度。
-
value -
将被填充的值，只有在
array的现有长度小于length的长度时才有效。
返回值
返回 array 用 value 填充到 length
指定的长度之后的一个副本。如果 length 为正，则填补到数组的右侧，如果为负则从左侧开始填补。如果
length 的绝对值小于或等于 array 数组的长度则没有任何填补。
范例
示例 #1 array_pad() 例子
<?php
$input = array(12, 10, 9);
$result = array_pad($input, 5, 0);
// result 是 array(12, 10, 9, 0, 0)
$result = array_pad($input, -7, -1);
// result 是 array(-1, -1, -1, -1, 12, 10, 9)
$result = array_pad($input, 2, "noop");
// 没有填充
?>
add a note
User Contributed Notes 11 notes
tugla ¶
13 years ago
Beware, if you try to pad an associative array using numeric keys, your keys will be re-numbered.
<?php
$a = array('size'=>'large', 'number'=>20, 'color'=>'red');
print_r($a);
print_r(array_pad($a, 5, 'foo'));
// use timestamps as keys
$b = array(1229600459=>'large', 1229604787=>20, 1229609459=>'red');
print_r($b);
print_r(array_pad($b, 5, 'foo'));
?>
yields this:
------------------
Array
(
[size] => large
[number] => 20
[color] => red
)
Array
(
[size] => large
[number] => 20
[color] => red
[0] => foo
[1] => foo
)
Array
(
[1229600459] => large
[1229604787] => 20
[1229609459] => red
)
Array
(
[0] => large
[1] => 20
[2] => red
[3] => foo
[4] => foo
)
scott*hurring.com ¶
19 years ago
to the previous commenter -- if you read the manual entry, you'd see that a negative pad_size will put the pad values at the front of the array.
goffrie at sympatico dot ca ¶
19 years ago
To daarius - you mean you have...
[2]=>"two"
[3]=>"three"
and you want...
[0]=>"FILLED"
[1]=>"FILLED"
[2]=>"two"
[3]=>"three"
[4]=>"FILLED"
[5]=>"FILLED"
If so, then the following code...
<?php
$array = array(2 => "two", 3 => "three");
$array = array_pad($array, count($array)+2, "FILLED");
$num = -(count($array)+2);
$array = array_pad($array, $num, "FILLED");
print_r($array);
?>
will return:
Array ( [0] => FILLED [1] => FILLED [2] => two [3] => three [4] => FILLED [5] => FILLED )
The ordering should be okay,...
mwwaygoo at hotmail dot com ¶
18 years ago
little older, a little wiser.
ksort() will order the array back into its normal order again
so:
<?php
$myArr = array(2 => 'two', 4 => 'four');
$newArr = array_pad(array(), 6, 'FILLED');
$newArr =$myArr+$newArr;
ksort($newArr);
?>
Will give :
Array ( [0] => FILLED [1] => FILLED [2] => two [3] => FILLED [4] => four [5] => FILLED )
Anonymous ¶
18 years ago
One way to initialize a 20x20 multidimensional array.
<?php
$a = array();
$b = array();
$b = array_pad($b,20,0);
$a = array_pad($a,20,$b);
?>
daarius at hotmail dot com ¶
19 years ago
yes that is true. But, if the index of the array is 2=two, 3=three
and i want 4 more keys to be filled. But, not just filled anywhere, but i want to maintain the key index.
so, i would like to have 0=FILLED, 1=FILLED ... 4=FILLED, 5=FILLED
now i got 4 more keys padded with my string.
We can do this "if" we know the missing keys, but if we dont, then it would be nice for array_pad() or perhaps some new function to do this?
obviously we can achive this by looping through the array using array_key_exists(), and if you dont find the key, simply create + fill it.
regards,
Daarius...
mwwaygoo at hotmail dot com ¶
19 years ago
OR you could do this
<?php
$myArr = array(2 => 'three', 3 => 'four');
$newArr = array_pad(array(), 4, 'FILLED');
$newArr =$myArr+$newArr;
?>
This gives your desired result BUT the ordering is a little wierd, because of the order they were added. Indexes are okay though and that is what you wanted.
print_r($newArr) outputs
Array ( [2] => three [3] => four [0] => FILLED [1] => FILLED )
hope this helps
oaev at mail dot ru ¶
17 years ago
Easy way to get an array contains 5 random numbers from 0 to 9:
$rand_arr = array_rand( array_pad( array(), 10, 1 ), 5 );
slava-san at mail dot ru ¶
8 years ago
// insert element to array
function array_insert(&$arr, $pos, $new_el=null) {
$arraypad = array_pad($arr, count($arr)+1, 0);
for ($i=count($arr)-1; $i>=$pos; $i--) {
$arr[$i+1] = $arr[$i];
if ($i == $pos) {
$arr[$i] = $new_el;
}
}
}
$digits = array();
$digits[0] = 0;
$digits[1] = 1;
$digits[2] = 2;
$digits[3] = 3;
$digits[4] = 4;
$digits[5] = 5;
echo "was: "; var_dump($digits);
array_insert($digits, 3, 100);
echo "new: "; var_dump($digits);
hk, StrApp Bussiness Solutions ¶
15 years ago
A simple example for array_pad()
the syntax is as follows: array_pad(array(), (+/-)int, value)
where "array" is the array to which the value is to be added,
"(+/-) int" is a value that decides the length of the array(it should be greater than the length of the array.
if its a negative number then the value will be added at the left of the array else it will be added to the right.
"values" denotes the value to be added to the array
lets try an example:
<?php
$digits = array();
$digits[0] = 1;
$digits[1] = 2;
$digits[2] = 3;
$arraypad = array_pad($digits, -4, "0");
print_r($arraypad);
?>
output:
Array ( [0] => 0 [1] => 1 [2] => 2 [3] => 3 )
sonu50imedbvu at gmail dot com(Sonu Jaiswal) ¶
11 years ago
Just an info about the value of "$pad_size" ,
If we set the value of "$pad_size" from -3 to 3,
It will produce the output like:
<?php
$result = array_pad($input, -3, "noop");
//result is array(12, 10, 9)
$result = array_pad($input, 3, "noop");
//result is array(12, 10, 9)
?>
means array will remain the same.